[SOLVED] Junk Codes Showing After Login

12 years 4 months ago #101661 by priyasdipu
[SOLVED] Junk Codes Showing After Login was created by priyasdipu
Hi,

I am using CB 1.2, after the users login from the site, it is showing something like this,

"Table 'incubati_jo151.jos_jam_receivers' doesn't exist SQL=SELECT COUNT(id) FROM `jos_jam_receivers` WHERE rid = 62 AND inbox = 1 AND state = 0".

Instead of "Hi User".

Need help regarding this.

Post edited by: priyasdipu, at: 2009/06/10 15:52

Post edited by: krileon, at: 2010/05/21 18:13

Please Log in to join the conversation.

12 years 4 months ago #102822 by sdiggles
Replied by sdiggles on topic Re:Junk Codes Showing After Login
I am having the same exact problem...
'MYSQL DATABASE NAME.jos_jam_receivers' doesn't exist SQL=SELECT COUNT(id) FROM `jos_jam_receivers` WHERE rid = 63 AND inbox = 1 AND state = 0

Anyone? (I changed the DB name for security purposes, but it was my DB name in that error)

Please help!

I am also having a problem with registrations.

The site is http://www.rehab-programs.org

Post edited by: sdiggles, at: 2009/06/22 21:07

Please Log in to join the conversation.

12 years 4 months ago #102823 by sdiggles
Replied by sdiggles on topic Re:Junk Codes Showing After Login
found a semi-work a round but it sacrifices CB's connections featured. Just turn it off and no error. I think this means the table just has to be built for that and wasn't built on installation...maybe a bug?

Please Log in to join the conversation.

12 years 4 months ago #102824 by nant
Replied by nant on topic Re:Junk Codes Showing After Login
Well the jos_jam_receivers table has nothing to do with CB - so not a CB bug.

Maybe a configuration error on your part - like enabling JAM PMS without actually having installed the JAM PMS component?
The following user(s) said Thank You: markroll

Please Log in to join the conversation.

12 years 2 months ago #107408 by Delmarva
Replied by Delmarva on topic Re:Junk Codes Showing After Login
This is something that I misconfigured, the answer is on page 72 of the manual. It maybe because something wasn't installed but definitely is because you selected or elected to show the path. Really, buy the manual, it is money well spent. And it supports our products development too. The solution is on my last posting, should be above this one.

Jeff

Post edited by: Delmarva, at: 2009/08/13 20:39
The following user(s) said Thank You: markroll

Please Log in to join the conversation.

12 years 2 months ago #107994 by Delmarva
Replied by Delmarva on topic Re:Junk Codes Showing After Login
Well, can't say this is true for everyone but I found the solution on my site. First off, it took four packs of cigarettes, about 20 glasses of iced tea, I crashed my entire site and had to have the host restore it (thank you SOLARENERGYHOST) and about 50 fruitless searches across the Internet.

Here it is:

In the modules, in your login (cb_login or whatever you renamed it)....Change the PRIVATE MESSAGING SYSTEM to, in my case uddeIM. In your case, something other than JAM. Don't know what you have installed in your system, but this fixed it. This should fix it. Change that one thing and it should be working properly.

Jeff

Post edited by: Delmarva, at: 2009/08/13 20:38

Post edited by: Delmarva, at: 2009/08/13 20:40

Post edited by: Delmarva, at: 2009/08/13 20:41
The following user(s) said Thank You: markroll

Please Log in to join the conversation.

Moderators: beatnantkrileon
Time to create page: 0.210 seconds

Facebook Twitter LinkedIn